Sludge Plows

VMI sludge plows allow you to directly inject sludge and wastewater directly into the ground instead of using other means to transport the waste. You can connect the discharge pipe from a dredge directly to a sludge plow and be injecting at the same time you are dredging. This saves over transporting the waste by truck or tanker. VMI offers three models of sluge plows to choose from: BSP-7, BSP-9, and BSP-19. Each plow requires the tractor/crawler to have 8 drawbar horsepower per shank. The BSP-7 (7 shanks) requires 56 drawbar horsepower. The BSP-9 (9 shanks) requires 72 drawbar horsepower. The BSP-19 (19 shanks) requires 152 HP at the drawbar.

VMI Pics040
C151

PicturefromCash 147

 

 

 

 

 

 

Sludge Plow Specs

 MODEL

BSP-7

BSP-9

BSP-19

GENERAL

Transporting Width-Wings Up

11’9″ 13’5″ 14’8″

Overall Width-Working Position

11’9″

13’5″

25’10”

Overall Length-Hose Cradle Removed

8’6″

8’6″

7’8″

Overall Length-Hose Cradle in Place

10’7″

10’7″

13’6″

Height

5’2″

5’2″

6’3″

Numbers & Size of Sweeps

7-16″ Sweeps, on 16″ Centers

9-16″ Sweeps, on 16″ Centers

19-18″ Sweeps, on 16″ Centers

Diameter Per Injection

 2″ I.D.  2″ I.D.  2″ I.D.

Discharge Volume Per Sweep

100 GPM

100 GPM

100 GPM

Plow Depth

12″

12″

12″

Lift Height Clearance

13 1/2″

13 1/2″

24″

Weight

 3880 4060 6500

 

 Controls

Hyd. Operated from Cab

Hyd. Operated from Cab

Hyd. Operated from Cab

Discharge Hose

Quick Couplers

Quick Couplers

Quick Couplers

 

* Please note, specs are subject to change