The Piranha excavator attachment is an alternative to a conventional floating dredge. Two models of the Piranha
Excavator Attachment are available, the MDE-4HN and MDE-6HN which attach to a track-hoe excavator in place of the
bucket. The Piranha Excavator Attachment is designed to remove material from shallow pits where a dredge may not
be practical. The Piranha Excavator Attachment has two hydraulic driven augers that feed material to the slurry pump
which discharges the material through discharge pipe to the disposal site or equipment. Both models have their own
diesel/hydraulic power-pack which mounts on the back of the excavator in place of the counter weight. All of the
controls are installed in the operators cab for easy operation.
Excavator Attachment are available, the MDE-4HN and MDE-6HN which attach to a track-hoe excavator in place of the
bucket. The Piranha Excavator Attachment is designed to remove material from shallow pits where a dredge may not
be practical. The Piranha Excavator Attachment has two hydraulic driven augers that feed material to the slurry pump
which discharges the material through discharge pipe to the disposal site or equipment. Both models have their own
diesel/hydraulic power-pack which mounts on the back of the excavator in place of the counter weight. All of the
controls are installed in the operators cab for easy operation.
| |||||||||||||||||||||||||||||||||||||
Hard Material Piranha
VMI also has a Piranha designed for hard material. This design uses a horizontal cutter head resembling the cutter
head of VMI horizontal dredges. The cutter assembly features carbide tipped teeth for maximum durability and life.
The design allows the carbide tipped teeth to be easily replaced . The cutter drum is driven by a planetary gearbox
powered by a hydraulic motor.
VMI also has a Piranha designed for hard material. This design uses a horizontal cutter head resembling the cutter
head of VMI horizontal dredges. The cutter assembly features carbide tipped teeth for maximum durability and life.
The design allows the carbide tipped teeth to be easily replaced . The cutter drum is driven by a planetary gearbox
powered by a hydraulic motor.
|
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| Products |
VMI Piranha Attachment |