VMI Sludge Plows |
VMI sludge plows allow you to directly inject sludge and wastewater directly into the ground instead of using other
means to transport the waste. You can connect the discharge pipe from a dredge directly to a sludge plow and be
injecting at the same time you are dredging. This saves over transporting the waste by truck or tanker. VMI offers
three models of sluge plows to choose from: BSP-7, BSP-9, and BSP-19. Each plow requires the tractor/crawler to
have 8 drawbar horsepower per shank. The BSP-7 (7 shanks) requires 56 drawbar horsepower. The BSP-9 (9
shanks) requires 72 drawbar horsepower. The BSP-19 (19 shanks) requires 152 HP at the drawbar.
means to transport the waste. You can connect the discharge pipe from a dredge directly to a sludge plow and be
injecting at the same time you are dredging. This saves over transporting the waste by truck or tanker. VMI offers
three models of sluge plows to choose from: BSP-7, BSP-9, and BSP-19. Each plow requires the tractor/crawler to
have 8 drawbar horsepower per shank. The BSP-7 (7 shanks) requires 56 drawbar horsepower. The BSP-9 (9
shanks) requires 72 drawbar horsepower. The BSP-19 (19 shanks) requires 152 HP at the drawbar.
| VMI, Inc. 1125 N. Maitlen Drive Cushing, Oklahoma USA 74023 Toll Free: (800) 762-2257 Phone: (918) 225-7000 Fax: (918) 225-0333 Email: info@vmi-dredges.com |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
